PUYANG REFRACTORIES GROUP CO LIMITED TRADE DATA ANALYSIS
Access comprehensive trade data for Puyang Refractories Group Co Limited with ease. Explore trade shipments, top suppliers & buyers, and values without the hassle.
Puyang Refractories Group Co Limited – Overview
Eximpedia analyzes Puyang Refractories Group Co Limited export and import records, including data from 0 buyers and 1 suppliers. We provide an intelligence report of Puyang Refractories Group Co Limited that covers trade statistics, shipment values, quantities, exporters & importers and trade destinations
Puyang Refractories Group Co Limited Buyers, Suppliers & Shipments
Puyang Refractories Group Co Limited import markets
Explore the Puyang Refractories Group Co Limited import market with monthly import values, major importers, HS Codes, key ports, top suppliers, and competitors
TOP IMPORT HS CODE
| HS CODE | USD VALUE | SHIPMENTS | % |
|---|---|---|---|
| 6902201000 | 1.93 | 1 | 100 |
| REFRACTORY BRICKS, BLOCKS, TILES AND SIMILAR REFRACTORY CERAMIC CONSTRUCTIONAL GOODS, OTHER THAN THOSE OF SILICEOUS FOSSIL MEALS OR SIMILAR SILICEOUS EARTHS | |||
| 6815990000 | 1.11 | 1 | 100 |
| ARTICLES OF STONE OR OF OTHER MINERAL SUBSTANCES (INCLUDING CARBON FIBRES, ARTICLES OF CARBON FIBRES AND ARTICLES OF PEAT), NOT ELSEWHERE SPECIFIED OR INCLUDED | |||
| 6903209000 | 0.88 | 1 | 100 |
| OTHER REFRACTORY CERAMIC GOODS (FOR EXAMPLE, RETORTS, CRUCIBLES, MUFFLES, NOZZLES, PLUGS, SUPPORTS, CUPELS, TUBES, PIPES, SHEATHS AND RODS), OTHER THAN THOSE OF SILICEOUS FOSSIL MEALS OR OF SIMILAR SILICEOUS EARTHS | |||
| 6815910090 | 0.87 | 1 | 100 |
| ARTICLES OF STONE OR OF OTHER MINERAL SUBSTANCES (INCLUDING CARBON FIBRES, ARTICLES OF CARBON FIBRES AND ARTICLES OF PEAT), NOT ELSEWHERE SPECIFIED OR INCLUDED | |||
| 3816009000 | 0.87 | 1 | 100 |
| Refractory cements, mortars, concretes and similar compositions, other than products of heading 3801[Rate Ref by SNo 92 in Sch III of Ntfn 01/2017 IGST] | |||
TOP IMPORT COUNTRY
| COUNTRY | USD VALUE | SHIPMENTS | % |
|---|---|---|---|
| UKRAINE | 6.12 | 1 | 100 |
TOP IMPORT PORTS
| PORT NAME | USD VALUE | SHIPMENTS | % |
|---|---|---|---|
| UA110020 | 3.43 | 1 | 100 |
| UA112070 | 1.70 | 1 | 100 |
| UA209230 | 0.32 | 1 | 100 |
| UA110150 | 0.38 | 1 | 100 |
| UA110140 | 0.02 | 1 | 100 |
TOP IMPORT COMPETITORS
| COMPANY | USD VALUE | SHIPMENTS |
|---|---|---|
| PJSC ZAPORIZH METALLURGICAL PLANT ZAPORIZHSTAL | 18.58 | 1 |
| SKENDERUN DEM R AND EL KA | 33.80 | 917 |
| ERE L DEM R AND ELK FABTA | 14.03 | 1272 |
| VESUVIUS ISTANBUL REFRACTORY INDUSTRY AND TRADE JOINT STOCK COMPANY | 25.73 | 751 |
| TURKISH REFRACTORY TRADE JOINT STOCK COMPANY AT RHI MAGNES | 13.03 | 292 |
TOP IMPORT SUPPLIERS
If you are looking to establish relationship with Puyang Refractories Group Co Limited Automation you can save time by getting access to the key decision makers and get a detailed report.
Puyang Refractories Group Co Limited Import Shipments
Discover the Puyang Refractories Group Co Limited with product description, import values, quantities, exporter name, country of origin and key destinations.
| HSN Code | Product Description | Imports | Exporter | Origin | Destination | Qty. |
|---|---|---|---|---|---|---|
| 6903209000 | 1. REFRACTORY MOLDED PRODUCTS (FIRED). PAN-SLAT PLATE BRAND PN-SLH-M85S FORMAT ?50MM - 302 PCS. (3,216 TONS, 3 PLACES) WITH CONTENT: AL2O3: 82.29%; C: 3.26%; BD: 3.15G/CM3; AP: 6.4%; CCS: 137MPA. REFRACTORY: 1740-1760 DEGREES.S. HEAT TREATMENT: DRYING AT A TEMPERATURE OF 1000 DEGREES CELSIUS. IT IS USED FOR POURING STEEL FROM THE STEEL POURING LADLE ON THE MNLZ. TRADE MARK: NO DATA MANUFACTURER: PUYANG REFRACTORIES GROUP CO., LTD COUNTRY OF MANUFACTURE: CHINA (CN) |  |
|
CHINA | UKRAINE | 0 |
| 3816009000 | 1. REFRACTORY CONCRETE AND MIXTURES. REFRACTORY CONCRETE PN-BSF1 IS INTENDED FOR PROTECTION OF THE METAL SHELL AND LEVELING LAYER OF THE BOTTOM OF THE STEEL LADLE. THE MAIN RAW MATERIAL COMPONENT AL2O3 - 58.59%. IT IS PRODUCED BY MIXING THE PREPARED RAW MATERIALS WITH THE ADDITION OF THE NECESSARY SUBSTANCES. TYPE OF BOND: INORGANIC. FIRE RESISTANCE - 1720-1740 DEGREES CELSIUS. IT IS SUPPLIED IN A DRY, FINISHED FORM IN THE FORM OF A POWDER. PACKAGING - POLYPROPYLENE BAGS (BIG BAGS). REFRACTORY MASS PN-MS3 IS INTENDED FOR LAYING IN THE SPACE BETWEEN THE WORKING LAYER OF THE WALLS AND THE REINFORCING LINING OF THE WALLS, AS WELL AS FOR LEVELING THE MASONRY OF THE WORKING LAYER OF THE BOTTOM IN THE HORIZON AT THE JUNCTION WITH THE CONTROL LAYER OF THE BOTTOM OF THE STEEL LADLE. IT CONSISTS OF MGO -55.1%, SIO2 ABOUT 35%. IT IS PRODUCED BY PREPARING RAW MATERIALS, GRINDING, ADDING THE NECESSARY COMPOUNDS AND MIXING IN A MIXER. THE TYPE OF BOND IS CHEMICAL. FIRE RESISTANCE 1720-1740 DEGREES CELSIUS. IT IS SUPPLIED IN THE FORM OF A DRY POWDER WITH A PARTICLE SIZE OF 0-3 MM. PACKAGING - POLYPROPYLENE BAGS (BIG BAGS). REFRACTORY FILLING MASS PN-DS4, INTENDED FOR FILLING THE GAPS BETWEEN THE NEST BLOCKS OF THE BLOWING AND STEEL POURING UNITS AND THE WORKING LINING OF THE BOTTOM OF THE STEEL POURING LADLE. MAIN RAW MATERIAL COMPONENTS: AL2O3 - 85.49%, MGO - 5.6%. IT IS PRODUCED BY PREPARING RAW MATERIALS, GRINDING, ADDING THE NECESSARY COMPOUNDS AND MIXING IN A MIXER. THE TYPE OF BOND IS CEMENT. FIRE RESISTANCE 1720-1740 DEGREES CELSIUS. SUPPLIED AS A DRY POWDER, GRAIN SIZE 0-3 MM. PACKAGING - POLYPROPYLENE BAGS (BIG-BAGS).""" | |
|
CHINA | UKRAINE | 0 |
| 6815910090 | 1. REFRACTORY MOLDED PRODUCTS (UNFIRED). SOCKET BLOCK BRAND PN-T33 - 48 PCS. (0.984 TONS, 1ST PLACE) WITH CONTENT: AL2O3: 42.05%; SIO2: 2.57%; MGO: 37.85%. REFRACTORY: 1740-1760 DEGREES.S. HEAT TREATMENT: DRYING AT A TEMPERATURE OF 200 DEGREES CELSIUS. IT IS USED TO INSTALL A MEASURING CUP IN A LADLE. TRADE MARK: NO DATA MANUFACTURER: PUYANG REFRACTORIES GROUP CO., LTD COUNTRY OF MANUFACTURE: CHINA (CN)""" | |
|
CHINA | UKRAINE | 0 |
| 6815990000 | 1. UNFIRED MOLDED REFRACTORY PRODUCT: SLIDING PLATE SLIDING PLATE PN-SLH-M -15,747 TONS. IT IS PRODUCED BY MIXING THE PREPARED RAW COMPONENTS WITH SUBSEQUENT HEATING, FORMING UNDER PRESSURE AND DRYING AT A TEMPERATURE OF 200 DEGREES C, PLACING IN A CASING (METAL SHELL), GROUTING AND GRINDING. CHEMICAL COMPOSITION: AL2O3-86.58%, C-2.86%, REFRACTORINESS 1740-1760 DEGREES C. HOLE DIAMETER 60 1MM, LENGTH 370 +1.5 -2MM, WIDTH 200 +1.5 -2MM. PHYSICAL PROPERTIES: COMPRESSIVE STRENGTH - 127MPA, DENSITY - 3.13G/CM3, OPEN POROSITY -8.1%. A STEEL LADLE IS INSTALLED IN THE GATE VALVE, THE RELEASE OF METAL OCCURS WHEN THE HOLES OF THE UPPER AND LOWER PLATES ARE ALIGNED. TRADEMARK: NO DATA. MANUFACTURER PUYANG REFRACTORIES GROUP CO., LTD, CN. | |
|
CHINA | UKRAINE | 0 |
| 3816009000 | 1. REFRACTORY CONCRETE AND MASSES FOR BLAST FURNACES: REFRACTORY CONCRETE /CASTABLE PN-ZG-18B-ZST - 11T. REFRACTORY CONCRETE /CASTABLE PN-SG-ZST -36T. PN-GUN-ZST-1TFORM: DRY MIXTURE. MAIN COMPONENT: ALUMINUM OXIDE, CHEMICAL COMPOSITION: AL2O3-66.16; 66.42% SIC -12.37%; 12.31 C - 1.20%. ;AL2O3- 51.72%, SIC+C -27.39%. AL2O3- 62.52%, SIC -9.43%. ;AL2O3- 56.83%, SIC+? -21.35%. REFRACTORINESS 1740-1760 DEGREES.?. INTENDED FOR LINING THE CHUTES OF THE BLAST FURNACE. TRADEMARK: NO DATA. MANUFACTURER: PUYANG REFRACTORIES GROUP CO., LTD. | |
|
CHINA | UKRAINE | 0 |
| 6903209000 | 1. FIRE-RESISTANT MOLDED PRODUCTS: PURGING PLUG PN-TC3-ZST - 200 PCS. BLOWING PLUGS IN THE SHAPE OF A CONE: BRANDS PN-TC3-ZST WITH CERAMIC BARS, CONTENT: AL2O3 -93.33%, CR2O3 -2.22%. THEY ARE PRODUCED BY MIXING THE PREPARED RAW COMPONENTS WITH SUBSEQUENT HEATING, FORMING UNDER PRESSURE AND FIRING AT A TEMPERATURE OF 1000 GR.C, PLACING IN A METAL JACKET. THEY ARE INSTALLED IN THE SLIDE GATE OF THE STEEL LADLE FOR BLOWING THE MOLTEN METAL WITH INERT GAS. REFRACTORY 1740-1760 GR.S. TRADEMARK: NO DATA. MANUFACTURER PUYANG REFRACTORIES GROUP CO., LTD. | |
|
CHINA | UKRAINE | 0 |
| 6902201000 | 1. REFRACTORY PRODUCTS WITH A CONTENT OF 93 WT.% OR MORE OF SILICA (SIO2): - DYNASTIC REFRACTORY PRODUCTS FOR COKE OVEN BATTERIES NO. 6- DK PN-DK 6198 -1,448 T- DK PN-DK 26686 -8,752 T- DK PN-DK 35658 -1,253 T- ?? PN-DK D -4,251 T- ?? PN-DK D-5 -5,628 T COMPOSITION: SIO2:94.0%; FE2O3:1.7%: REFRACTORY Û 1650 C. DYNASOV REFRACTORIES BRAND PN-DK ARE FIRED REFRACTORY BRICKS , WHICH ARE USED IN THE COKE INDUSTRY FOR LINING COKE BATTERIES (WALL, HEAD, VERTICAL ZONE AND OVERLAP OF VERTICALS THAT ARE RUBBED WITH COKE) | |
|
CHINA | UKRAINE | 0 |
| 6902201000 | 1. REFRACTORY PRODUCTS WITH A CONTENT OF 93 WT.% OR MORE OF SILICA (SIO2): - DYNASTIC REFRACTORY PRODUCTS FOR COKE OVEN BATTERIES NO. 6- DK PN-DK 33807 -1.511 T- DK PN-DK 33826 -1.504 T- DK PN-DK 33836 -1,429 T- DC PN-DK 33863 -1,435 T- DC PN-DK 33879 -4,296 T- DC PN-DK 33879 -1,518 T- DC PN-DK 33975 -1,464 T- DC PN-DK 35387 -1,571 T- ?? PN-DK 35388 -1,360 T- ?? PN-DK D-5 -5,628 T INDUSTRY FOR LINING COKE BATTERIES (WALL, HEADER, AREA OF VERTICALS AND OVERLAP OF VERTICALS THAT ARE ERASED BY COKE) | |
|
CHINA | UKRAINE | 0 |
| 6815990000 | 1. UNFIRED MOLDED REFRACTORY PRODUCT: SLIDING PLATE SLIDING PLATE PN-SLH-M -8.27 TONS. IT IS PRODUCED BY MIXING THE PREPARED RAW COMPONENTS WITH SUBSEQUENT HEATING, FORMING UNDER PRESSURE AND DRYING AT A TEMPERATURE OF 200 DEGREES C, PLACING IN A CASING (METAL SHELL), GROUTING AND GRINDING. CHEMICAL COMPOSITION: AL2O3-86.57%, ?-3.85%, REFRACTORINESS 1740-1760 DEGREES.?. HOLE DIAMETER 60 1MM, LENGTH 370 +1.5 -2MM, WIDTH 200 +1.5 -2MM. PHYSICAL PROPERTIES: COMPRESSIVE STRENGTH - 127MPA, DENSITY - 3.13G/CM3, OPEN POROSITY -8.1%. A STEEL LADLE IS INSTALLED IN THE GATE VALVE, THE RELEASE OF METAL OCCURS WHEN THE HOLES OF THE UPPER AND LOWER PLATES ARE ALIGNED. IT IS USED FOR OWN PRODUCTION NEEDS AT PJSC ""ZAPORIZHSTAL"". TRADEMARK: NO DATA. MANUFACTURED BY PUYANG REFRACTORIES GROUP CO., LTD, CN.""" | |
|
CHINA | UKRAINE | 0 |
| 6902201000 | 1. REFRACTORY PRODUCTS WITH A CONTENT OF 93 WT.% OR MORE OF SILICA (SIO2): - DYNASTIC REFRACTORY PRODUCTS FOR COKE OVEN BATTERIES NO. 6- DK PN-DK 26686 -14,222 T- DK PN-DK 33861 -1,271 T- DK PN-DK 35382 -1,339 T- DC PN-DK 35393 -1,288 T- DC PN-DK 35394 -1,280 T- DC PN-DK D-5 -2,814 T PN-DK BRAND REFRACTORIES ARE FIRED REFRACTORY BRICKS USED IN THE COKE INDUSTRY FOR LINING COKE BATTERIES (WALLS, HEADERS, THE ZONE OF VERTICALS AND THE OVERLAP OF VERTICALS WORN BY COKE) | |
|
CHINA | UKRAINE | 0 |
Get Started with Eximpedia
Start 5 Days Free Trial
No Pay, No Delay - 5 days Your Way!
Book a Free Demo
Learn How our platform works in just 20 minutes!
Download Free Sample Report
Free Import-Export Sample data-One Click Away!
Why should you choose Eximpedia?
Broad Range of Country Datasets
Our dedicated team of experts delivers current and flexible data from key global locations, enabling you to make essential decisions with vital information and insights.
Easy to understand deep analysis
We use bespoke layered visualizations for diving deep into our country and logistics data to provide your team with graphical assistance and essential data analysis and reporting.
Most Accurate Information
All of our datasets are quality-controlled by layers of inspection before it ever reach your platform. This helps us maintain the high reliability our clients have come to trust.
Competitive Supplier Engagement Watch
Keep an eye out for any collaboration between your suppliers and your rivals, as this may impact their ability to satisfy your requirements.
Right away on-screen support
With instant remote on-screen assistance, chat support, and user training, our customer success team is available to you around the clock.
Access Database Across 130+ Countries
Explore competitors' shipment histories, statistical and analytical reports, and country-specific information from more than 130 nations.